Mobil 1™ ESP X2 0W-20
Features and Benefits
Features |
Advantages and Potential Benefits |
Active cleaning agents |
Helps to prevent the buildup of harmful deposits to enable long and clean engine life** Provides outstanding engine cleanliness and sludge control |
|
**Compared to vehicle manufacturer standard |
Outstanding thermal and oxidation stability |
Helps to reduce oil aging allowing extended drain interval protection |
Enhanced frictional properties |
Provides up to 4% fuel economy improvement versus Mobil 1 ESP Formula 5W-30*** |
|
***Savings would be based on switching from a higher viscosity motor oil, similar to Mobil 1 ESP Formula 5W-30, to a 0W-20 viscosity grade. Actual savings are dependent upon vehicle and engine type, outside temperature and barometric pressure, driving conditions and your current engine oil viscosity. |
Excellent low temperature capabilities |
Quick cold weather performance to help provide fast protection at start-up |
Outstanding high temperature capabilities Wear protection |
Provided outstanding high temperature protection over the entire oil drain interval** |
|
**Compared to vehicle manufacturer standard |
Wear protection |
Provides outstanding wear protection over the full oil drain interval** |
|
**Compared to vehicle manufacturer standard |
Applications
Mobil 1 ESP x2 0W-20 is recommended for the new high-performance gasoline and diesel engines found in emerging European vehicles that require SAE 0W-20 viscosity grades.
• Mobil 1 ESP x2 0W-20 can only be used in the vehicles for which it is approved. It is not backward compatible with older vehicle engines.
• Mobil 1 ESP x2 0W-20 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
**** Always consult the owner’s manual of the vehicle for the manufacturer’s recommended viscosity grade and specifications
Specifications and Approvals
This product has the following approvals: |
MB-Approval 229.71 |
Porsche C20 |
VW 508 00 |
VW 509 00 |
STJLR.51.5122 |
STJLR.03.5006 |
GM dexosD Licensed (DD0753IA015) |
This product meets or exceeds the requirements of: |
API SN Engine Test Requirements |
API SL |
ACEA C5 |
Properties and Specifications
Property |
|
Grade |
SAE 0W-20 |
Ash, Sulfated, mass%, ASTM D874 |
0.8 |
Density @ 15.6 C, g/cm3, ASTM D4052 |
0.843 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
235 |
Hi-Temp Hi-Shear Viscosity @ 150 C, mPa.s, ASTM D4683 |
2.6 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
7.8 |
Pour Point, °C, ASTM D97 |
-51 |
Viscosity Index, ASTM D2270 |
175 |